/

/

Technology in Traditional Craftsmanship: 3D-Printed Tools for Ceramic Cups

Technology in Traditional Craftsmanship

November 2026 · Ceramics and 3D printing

3D-Printed Tools for Ceramic Cups

Handmade glazed ceramic cups, some turned upside down to show the mkt logo stamped on the base

At a glance

Order

Around 80 ceramic cups

Team

Three people

3D printed

Mould, potter's wheel support, logo stamp

Made by hand

Finishing, patterns, glazes

Shaping

Printed mould and hydraulic press

For an order of around 80 ceramic cups, we brought together two of the disciplines we work in: 3D printing and ceramics. We designed and printed our own tools, and everything else was done by hand.

Why we printed our own tools

An order of around 80 cups, handled by three of us, meant a lot of repetition. Printing our own tools made the process easier, and let us design each one for exactly this cup and this way of working.

The tools took care of the shape and the repetitive steps. The clay work stayed in our hands.

Three printed tools

The mould

The most important printed piece. It is made of four parts: a base, two side pieces and a lid that carries the inner shape of the cup. The parts are held together with screws, and two pins on the lid slot into the side pieces to keep everything aligned. Above the cup, we left an empty space on purpose, so the extra clay has somewhere to go. The closed mould then goes under the hydraulic press, which presses the clay into shape.

The potter's wheel support

A rotating support for the potter's wheel. You can buy one, but we chose to make the most of 3D printing: we designed it ourselves and printed it in our workshop.

The logo stamp

Printed on a smaller, finer 3D printer, the stamp marks the logo of the client who placed the order on the bottom of every cup.

3D-printed mould pieces wrapped in plastic film, held by hand

The mould

Clay cup on the 3D-printed rotating support mounted on a potter's wheel

The potter's wheel support

3D-printed stamp with the mkt logo, used to mark the base of the cups

The logo stamp

The rest, by hand

Everything else was done entirely by hand, from finishing each cup to the patterns and the glazes. The printer made the tools; the cups were made by people. This is how we bring technology into craft: as support for the work of the hands, not as a replacement.

More stories

← All stories